And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.281
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.002
And
I accept adding "cowsay" to Additional Software
5.113
And
Additional Software is correctly configured for package "cowsay"
0.529
And
I shutdown Tails and wait for the computer to power off
4.145
And
I start Tails from USB drive "__internal" with network unplugged
35.878
And
I enable persistence
11.671
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
8.301
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.035
And
available upgrades have been checked
1.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.314
And
I can open the Additional Software configuration window from the notification
2.648
And
I shutdown Tails and wait for the computer to power off
18.115
And
I start Tails from USB drive "__internal" with network unplugged
34.872
And
I enable persistence
11.337
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.714
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.491
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064