And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.787
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.023
And
I accept adding "cowsay" to Additional Software
5.234
And
Additional Software is correctly configured for package "cowsay"
0.550
And
I shutdown Tails and wait for the computer to power off
2.595
And
I start Tails from USB drive "__internal" with network unplugged
33.291
And
I enable persistence
11.743
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
7.692
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.026
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.849
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
17.844
And
I start Tails from USB drive "__internal" with network unplugged
34.194
And
I enable persistence
11.548
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.153
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044