And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.554
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.201
And
I accept adding "cowsay" to Additional Software
4.025
And
Additional Software is correctly configured for package "cowsay"
0.504
And
I shutdown Tails and wait for the computer to power off
3.930
And
I start Tails from USB drive "__internal" with network unplugged
33.602
And
I enable persistence
13.235
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.157
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.037
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.371
And
I can open the Additional Software configuration window from the notification
2.402
And
I shutdown Tails and wait for the computer to power off
17.767
And
I start Tails from USB drive "__internal" with network unplugged
34.004
And
I enable persistence
11.202
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.514
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054