And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.088
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.230
And
I accept adding "cowsay" to Additional Software
2.542
And
Additional Software is correctly configured for package "cowsay"
0.622
And
I shutdown Tails and wait for the computer to power off
2.586
And
I start Tails from USB drive "__internal" with network unplugged
36.168
And
I enable persistence
12.411
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.803
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.506
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.030
And
available upgrades have been checked
1.105
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.778
And
I can open the Additional Software configuration window from the notification
2.544
And
I shutdown Tails and wait for the computer to power off
13.517
And
I start Tails from USB drive "__internal" with network unplugged
35.442
And
I enable persistence
11.802
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.534
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.106
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088