And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.130
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.630
And
I accept adding "cowsay" to Additional Software
2.556
And
Additional Software is correctly configured for package "cowsay"
0.691
And
I shutdown Tails and wait for the computer to power off
4.233
And
I start Tails from USB drive "__internal" with network unplugged
35.550
And
I enable persistence
11.746
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
8.700
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.031
And
the network is plugged
0.029
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.797
And
I can open the Additional Software configuration window from the notification
2.536
And
I shutdown Tails and wait for the computer to power off
4.111
And
I start Tails from USB drive "__internal" with network unplugged
34.172
And
I enable persistence
13.174
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.083
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055