And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.483
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.228
And
I accept adding "cowsay" to Additional Software
5.039
And
Additional Software is correctly configured for package "cowsay"
0.690
And
I shutdown Tails and wait for the computer to power off
4.139
And
I start Tails from USB drive "__internal" with network unplugged
33.255
And
I enable persistence
12.089
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.510
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.381
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.034
And
available upgrades have been checked
1.121
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.907
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
12.710
And
I start Tails from USB drive "__internal" with network unplugged
33.430
And
I enable persistence
11.349
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.107
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048