And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.217
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.298
And
I accept adding "cowsay" to Additional Software
4.047
And
Additional Software is correctly configured for package "cowsay"
0.638
And
I shutdown Tails and wait for the computer to power off
3.995
And
I start Tails from USB drive "__internal" with network unplugged
33.941
And
I enable persistence
11.015
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.480
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.027
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.320
And
I can open the Additional Software configuration window from the notification
2.570
And
I shutdown Tails and wait for the computer to power off
18.052
And
I start Tails from USB drive "__internal" with network unplugged
33.373
And
I enable persistence
11.154
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
7.669
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057