And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.516
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
4.935
And
I accept adding "cowsay" to Additional Software
3.969
And
Additional Software is correctly configured for package "cowsay"
0.621
And
I shutdown Tails and wait for the computer to power off
4.207
And
I start Tails from USB drive "__internal" with network unplugged
33.466
And
I enable persistence
11.963
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
6.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.032
And
available upgrades have been checked
2.121
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.419
And
I can open the Additional Software configuration window from the notification
2.620
And
I shutdown Tails and wait for the computer to power off
17.675
And
I start Tails from USB drive "__internal" with network unplugged
33.639
And
I enable persistence
11.466
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.332
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068