And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.212
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.848
And
I accept adding "cowsay" to Additional Software
5.188
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
2.637
And
I start Tails from USB drive "__internal" with network unplugged
34.345
And
I enable persistence
11.484
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
7.781
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.029
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.895
And
I can open the Additional Software configuration window from the notification
2.638
And
I shutdown Tails and wait for the computer to power off
18.263
And
I start Tails from USB drive "__internal" with network unplugged
33.246
And
I enable persistence
12.563
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.050
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045