And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.749
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.590
And
I accept adding "cowsay" to Additional Software
4.136
And
Additional Software is correctly configured for package "cowsay"
0.515
And
I shutdown Tails and wait for the computer to power off
4.152
And
I start Tails from USB drive "__internal" with network unplugged
33.172
And
I enable persistence
11.410
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
6.747
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.025
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.824
And
I can open the Additional Software configuration window from the notification
2.386
And
I shutdown Tails and wait for the computer to power off
14.069
And
I start Tails from USB drive "__internal" with network unplugged
33.137
And
I enable persistence
10.491
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.933
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.125
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.038