And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.293
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.437
And
I accept adding "cowsay" to Additional Software
4.020
And
Additional Software is correctly configured for package "cowsay"
0.637
And
I shutdown Tails and wait for the computer to power off
4.016
And
I start Tails from USB drive "__internal" with network unplugged
35.478
And
I enable persistence
11.711
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.374
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.473
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.022
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.334
And
I can open the Additional Software configuration window from the notification
2.543
And
I shutdown Tails and wait for the computer to power off
12.935
And
I start Tails from USB drive "__internal" with network unplugged
34.117
And
I enable persistence
11.496
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.060
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055