And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.969
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.388
And
I accept adding "cowsay" to Additional Software
2.460
And
Additional Software is correctly configured for package "cowsay"
0.679
And
I shutdown Tails and wait for the computer to power off
3.923
And
I start Tails from USB drive "__internal" with network unplugged
35.030
And
I enable persistence
11.388
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.667
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.029
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.096
And
I can open the Additional Software configuration window from the notification
2.537
And
I shutdown Tails and wait for the computer to power off
13.031
And
I start Tails from USB drive "__internal" with network unplugged
34.530
And
I enable persistence
11.144
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.710
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049