And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.404
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.970
And
I accept adding "cowsay" to Additional Software
4.782
And
Additional Software is correctly configured for package "cowsay"
0.730
And
I shutdown Tails and wait for the computer to power off
3.902
And
I start Tails from USB drive "__internal" with network unplugged
34.024
And
I enable persistence
11.442
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
8.206
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.425
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.031
And
the network is plugged
0.026
And
available upgrades have been checked
1.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.326
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
12.790
And
I start Tails from USB drive "__internal" with network unplugged
33.461
And
I enable persistence
11.527
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.107
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066