And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.908
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.769
And
I accept adding "cowsay" to Additional Software
4.017
And
Additional Software is correctly configured for package "cowsay"
0.505
And
I shutdown Tails and wait for the computer to power off
4.060
And
I start Tails from USB drive "__internal" with network unplugged
33.770
And
I enable persistence
11.145
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
7.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.026
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.024
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.430
And
I can open the Additional Software configuration window from the notification
2.377
And
I shutdown Tails and wait for the computer to power off
17.560
And
I start Tails from USB drive "__internal" with network unplugged
32.356
And
I enable persistence
10.932
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.955
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.153
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053