And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.620
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.775
And
I accept adding "cowsay" to Additional Software
5.125
And
Additional Software is correctly configured for package "cowsay"
0.577
And
I shutdown Tails and wait for the computer to power off
4.016
And
I start Tails from USB drive "__internal" with network unplugged
33.056
And
I enable persistence
11.035
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
7.196
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.036
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.594
And
I can open the Additional Software configuration window from the notification
2.594
And
I shutdown Tails and wait for the computer to power off
12.558
And
I start Tails from USB drive "__internal" with network unplugged
32.465
And
I enable persistence
12.576
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
7.373
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.143
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051