And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.218
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.633
And
I accept adding "cowsay" to Additional Software
4.092
And
Additional Software is correctly configured for package "cowsay"
0.438
And
I shutdown Tails and wait for the computer to power off
2.514
And
I start Tails from USB drive "__internal" with network unplugged
30.954
And
I enable persistence
10.193
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
6.920
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.034
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.687
And
I can open the Additional Software configuration window from the notification
2.405
And
I shutdown Tails and wait for the computer to power off
12.655
And
I start Tails from USB drive "__internal" with network unplugged
33.955
And
I enable persistence
11.285
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.647
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.135
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059