And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.816
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.964
And
I accept adding "cowsay" to Additional Software
4.882
And
Additional Software is correctly configured for package "cowsay"
0.533
And
I shutdown Tails and wait for the computer to power off
4.007
And
I start Tails from USB drive "__internal" with network unplugged
33.806
And
I enable persistence
11.547
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.490
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.065
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.298
And
I can open the Additional Software configuration window from the notification
2.401
And
I shutdown Tails and wait for the computer to power off
16.761
And
I start Tails from USB drive "__internal" with network unplugged
35.537
And
I enable persistence
11.718
And
I configure APT to prefer an old version of cowsay
0.058
And
I log in to a new session
7.540
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.080
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059