And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.223
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.079
And
I accept adding "cowsay" to Additional Software
3.891
And
Additional Software is correctly configured for package "cowsay"
0.467
And
I shutdown Tails and wait for the computer to power off
2.551
And
I start Tails from USB drive "__internal" with network unplugged
32.391
And
I enable persistence
10.346
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.782
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.130
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.037
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.780
And
I can open the Additional Software configuration window from the notification
2.556
And
I shutdown Tails and wait for the computer to power off
12.554
And
I start Tails from USB drive "__internal" with network unplugged
32.611
And
I enable persistence
10.635
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.904
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.035
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.042