And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.992
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.762
And
I accept adding "cowsay" to Additional Software
4.280
And
Additional Software is correctly configured for package "cowsay"
0.560
And
I shutdown Tails and wait for the computer to power off
5.379
And
I start Tails from USB drive "__internal" with network unplugged
33.480
And
I enable persistence
10.648
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.614
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.027
And
available upgrades have been checked
1.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.284
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
14.198
And
I start Tails from USB drive "__internal" with network unplugged
32.960
And
I enable persistence
11.185
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.242
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078