And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.105
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.662
And
I accept adding "cowsay" to Additional Software
2.404
And
Additional Software is correctly configured for package "cowsay"
0.682
And
I shutdown Tails and wait for the computer to power off
4.567
And
I start Tails from USB drive "__internal" with network unplugged
35.362
And
I enable persistence
14.601
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
9.649
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.378
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.034
And
available upgrades have been checked
1.160
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.365
And
I can open the Additional Software configuration window from the notification
2.512
And
I shutdown Tails and wait for the computer to power off
12.859
And
I start Tails from USB drive "__internal" with network unplugged
34.380
And
I enable persistence
12.174
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.487
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070