And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.495
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.327
And
I accept adding "cowsay" to Additional Software
4.007
And
Additional Software is correctly configured for package "cowsay"
0.451
And
I shutdown Tails and wait for the computer to power off
2.631
And
I start Tails from USB drive "__internal" with network unplugged
31.640
And
I enable persistence
10.647
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
6.831
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.031
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.765
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
12.490
And
I start Tails from USB drive "__internal" with network unplugged
31.970
And
I enable persistence
10.150
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.454
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057