And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.473
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.441
And
I accept adding "cowsay" to Additional Software
3.978
And
Additional Software is correctly configured for package "cowsay"
0.557
And
I shutdown Tails and wait for the computer to power off
3.986
And
I start Tails from USB drive "__internal" with network unplugged
35.042
And
I enable persistence
13.372
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.230
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.373
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.041
And
available upgrades have been checked
0.041
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.304
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
12.710
And
I start Tails from USB drive "__internal" with network unplugged
34.650
And
I enable persistence
12.173
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.700
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058