And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.090
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.995
And
I accept adding "cowsay" to Additional Software
5.065
And
Additional Software is correctly configured for package "cowsay"
0.666
And
I shutdown Tails and wait for the computer to power off
4.277
And
I start Tails from USB drive "__internal" with network unplugged
35.877
And
I enable persistence
11.732
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
6.886
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.027
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.762
And
I can open the Additional Software configuration window from the notification
2.716
And
I shutdown Tails and wait for the computer to power off
17.771
And
I start Tails from USB drive "__internal" with network unplugged
33.148
And
I enable persistence
11.104
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.462
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044