And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.149
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.385
And
I accept adding "cowsay" to Additional Software
3.977
And
Additional Software is correctly configured for package "cowsay"
0.509
And
I shutdown Tails and wait for the computer to power off
2.556
And
I start Tails from USB drive "__internal" with network unplugged
32.448
And
I enable persistence
10.508
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
6.491
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.334
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.034
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.768
And
I can open the Additional Software configuration window from the notification
2.530
And
I shutdown Tails and wait for the computer to power off
17.388
And
I start Tails from USB drive "__internal" with network unplugged
31.268
And
I enable persistence
10.661
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.640
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.111
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.039