And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.559
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.286
And
I accept adding "cowsay" to Additional Software
4.892
And
Additional Software is correctly configured for package "cowsay"
0.623
And
I shutdown Tails and wait for the computer to power off
2.658
And
I start Tails from USB drive "__internal" with network unplugged
33.692
And
I enable persistence
10.979
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.678
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.026
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.031
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.504
And
I can open the Additional Software configuration window from the notification
2.450
And
I shutdown Tails and wait for the computer to power off
12.696
And
I start Tails from USB drive "__internal" with network unplugged
33.679
And
I enable persistence
14.329
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
8.428
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.084
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072