And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.332
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.908
And
I accept adding "cowsay" to Additional Software
3.982
And
Additional Software is correctly configured for package "cowsay"
0.598
And
I shutdown Tails and wait for the computer to power off
2.689
And
I start Tails from USB drive "__internal" with network unplugged
34.319
And
I enable persistence
11.410
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.469
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.036
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.492
And
I can open the Additional Software configuration window from the notification
2.566
And
I shutdown Tails and wait for the computer to power off
12.894
And
I start Tails from USB drive "__internal" with network unplugged
32.760
And
I enable persistence
10.477
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
8.319
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058