And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.173
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.383
And
I accept adding "cowsay" to Additional Software
4.043
And
Additional Software is correctly configured for package "cowsay"
0.502
And
I shutdown Tails and wait for the computer to power off
3.912
And
I start Tails from USB drive "__internal" with network unplugged
31.217
And
I enable persistence
10.024
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.034
And
I log in to a new session
6.991
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.030
And
the network is plugged
0.038
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.837
And
I can open the Additional Software configuration window from the notification
2.471
And
I shutdown Tails and wait for the computer to power off
12.441
And
I start Tails from USB drive "__internal" with network unplugged
32.359
And
I enable persistence
10.415
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.632
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.117
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045