And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.260
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.234
And
I accept adding "cowsay" to Additional Software
4.015
And
Additional Software is correctly configured for package "cowsay"
0.471
And
I shutdown Tails and wait for the computer to power off
2.678
And
I start Tails from USB drive "__internal" with network unplugged
31.735
And
I enable persistence
10.584
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
6.470
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.031
And
available upgrades have been checked
0.034
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.357
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
2:6.698
And
I start Tails from USB drive "__internal" with network unplugged
32.895
And
I enable persistence
10.738
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.451
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.035
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044