And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.644
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.336
And
I accept adding "cowsay" to Additional Software
4.333
And
Additional Software is correctly configured for package "cowsay"
0.479
And
I shutdown Tails and wait for the computer to power off
4.203
And
I start Tails from USB drive "__internal" with network unplugged
33.498
And
I enable persistence
10.748
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
6.738
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.532
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.028
And
available upgrades have been checked
1.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.792
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
13.741
And
I start Tails from USB drive "__internal" with network unplugged
33.359
And
I enable persistence
10.828
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.140
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097