And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.040
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.519
And
I accept adding "cowsay" to Additional Software
3.956
And
Additional Software is correctly configured for package "cowsay"
0.507
And
I shutdown Tails and wait for the computer to power off
2.577
And
I start Tails from USB drive "__internal" with network unplugged
33.142
And
I enable persistence
10.343
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
7.078
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.407
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.148
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.389
And
I can open the Additional Software configuration window from the notification
2.400
And
I shutdown Tails and wait for the computer to power off
12.603
And
I start Tails from USB drive "__internal" with network unplugged
33.638
And
I enable persistence
11.077
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.111
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.033
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052