And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.036
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.773
And
I accept adding "cowsay" to Additional Software
4.971
And
Additional Software is correctly configured for package "cowsay"
0.498
And
I shutdown Tails and wait for the computer to power off
4.154
And
I start Tails from USB drive "__internal" with network unplugged
34.025
And
I enable persistence
14.205
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.455
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.028
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.848
And
I can open the Additional Software configuration window from the notification
2.438
And
I shutdown Tails and wait for the computer to power off
12.907
And
I start Tails from USB drive "__internal" with network unplugged
33.499
And
I enable persistence
11.072
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.027
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062