And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:9.602
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.020
And
I accept adding "cowsay" to Additional Software
4.050
And
Additional Software is correctly configured for package "cowsay"
0.497
And
I shutdown Tails and wait for the computer to power off
2.582
And
I start Tails from USB drive "__internal" with network unplugged
31.940
And
I enable persistence
10.422
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
6.623
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.137
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.078
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.749
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
12.485
And
I start Tails from USB drive "__internal" with network unplugged
31.386
And
I enable persistence
11.240
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.476
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052