And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.575
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.390
And
I accept adding "cowsay" to Additional Software
2.295
And
Additional Software is correctly configured for package "cowsay"
0.601
And
I shutdown Tails and wait for the computer to power off
4.082
And
I start Tails from USB drive "__internal" with network unplugged
34.606
And
I enable persistence
14.220
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
6.772
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.031
And
available upgrades have been checked
1.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.280
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
14.146
And
I start Tails from USB drive "__internal" with network unplugged
34.310
And
I enable persistence
11.817
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.478
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.085
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060