And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.369
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.840
And
I accept adding "cowsay" to Additional Software
4.804
And
Additional Software is correctly configured for package "cowsay"
0.664
And
I shutdown Tails and wait for the computer to power off
2.747
And
I start Tails from USB drive "__internal" with network unplugged
32.924
And
I enable persistence
11.184
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
7.879
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.038
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.694
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
18.168
And
I start Tails from USB drive "__internal" with network unplugged
34.753
And
I enable persistence
11.347
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.481
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051