And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.864
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.500
And
I accept adding "cowsay" to Additional Software
4.838
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
4.665
And
I start Tails from USB drive "__internal" with network unplugged
34.721
And
I enable persistence
12.404
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
7.390
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.557
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.097
And
the network is plugged
0.031
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.856
And
I can open the Additional Software configuration window from the notification
2.589
And
I shutdown Tails and wait for the computer to power off
12.832
And
I start Tails from USB drive "__internal" with network unplugged
35.524
And
I enable persistence
14.755
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.512
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052