And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.741
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.271
And
I accept adding "cowsay" to Additional Software
4.968
And
Additional Software is correctly configured for package "cowsay"
0.666
And
I shutdown Tails and wait for the computer to power off
4.336
And
I start Tails from USB drive "__internal" with network unplugged
35.099
And
I enable persistence
15.093
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.661
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.042
And
available upgrades have been checked
2.240
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.790
And
I can open the Additional Software configuration window from the notification
2.656
And
I shutdown Tails and wait for the computer to power off
18.402
And
I start Tails from USB drive "__internal" with network unplugged
34.213
And
I enable persistence
12.488
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.142
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051