And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.727
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.200
And
I accept adding "cowsay" to Additional Software
3.890
And
Additional Software is correctly configured for package "cowsay"
0.493
And
I shutdown Tails and wait for the computer to power off
2.573
And
I start Tails from USB drive "__internal" with network unplugged
32.122
And
I enable persistence
10.521
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.130
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.025
And
available upgrades have been checked
1.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.496
And
I can open the Additional Software configuration window from the notification
2.729
And
I shutdown Tails and wait for the computer to power off
17.368
And
I start Tails from USB drive "__internal" with network unplugged
31.969
And
I enable persistence
10.310
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.571
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049