And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.253
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.364
And
I accept adding "cowsay" to Additional Software
5.200
And
Additional Software is correctly configured for package "cowsay"
0.594
And
I shutdown Tails and wait for the computer to power off
3.864
And
I start Tails from USB drive "__internal" with network unplugged
32.198
And
I enable persistence
11.415
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
8.869
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.033
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.407
And
I can open the Additional Software configuration window from the notification
2.525
And
I shutdown Tails and wait for the computer to power off
17.900
And
I start Tails from USB drive "__internal" with network unplugged
33.075
And
I enable persistence
10.721
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.468
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054