And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.592
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.127
And
I accept adding "cowsay" to Additional Software
5.048
And
Additional Software is correctly configured for package "cowsay"
0.526
And
I shutdown Tails and wait for the computer to power off
2.572
And
I start Tails from USB drive "__internal" with network unplugged
33.620
And
I enable persistence
13.178
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.877
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.041
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.360
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
18.374
And
I start Tails from USB drive "__internal" with network unplugged
36.088
And
I enable persistence
13.382
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.974
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068