And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.806
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.239
And
I accept adding "cowsay" to Additional Software
2.497
And
Additional Software is correctly configured for package "cowsay"
0.659
And
I shutdown Tails and wait for the computer to power off
5.273
And
I start Tails from USB drive "__internal" with network unplugged
35.756
And
I enable persistence
12.608
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
8.170
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.036
And
the network is plugged
0.026
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.903
And
I can open the Additional Software configuration window from the notification
2.487
And
I shutdown Tails and wait for the computer to power off
12.929
And
I start Tails from USB drive "__internal" with network unplugged
35.331
And
I enable persistence
11.651
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.103
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.042
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058