And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.075
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.460
And
I accept adding "cowsay" to Additional Software
5.287
And
Additional Software is correctly configured for package "cowsay"
0.584
And
I shutdown Tails and wait for the computer to power off
3.971
And
I start Tails from USB drive "__internal" with network unplugged
35.134
And
I enable persistence
12.497
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.569
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.025
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.327
And
I can open the Additional Software configuration window from the notification
2.716
And
I shutdown Tails and wait for the computer to power off
13.002
And
I start Tails from USB drive "__internal" with network unplugged
34.236
And
I enable persistence
11.917
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.891
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059