And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.833
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.403
And
I accept adding "cowsay" to Additional Software
3.919
And
Additional Software is correctly configured for package "cowsay"
0.574
And
I shutdown Tails and wait for the computer to power off
4.119
And
I start Tails from USB drive "__internal" with network unplugged
33.815
And
I enable persistence
10.678
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
8.259
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.509
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.030
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.968
And
I can open the Additional Software configuration window from the notification
2.406
And
I shutdown Tails and wait for the computer to power off
8.176
And
I start Tails from USB drive "__internal" with network unplugged
34.857
And
I enable persistence
11.303
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
8.411
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048