And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.067
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.776
And
I accept adding "cowsay" to Additional Software
5.321
And
Additional Software is correctly configured for package "cowsay"
0.536
And
I shutdown Tails and wait for the computer to power off
2.528
And
I start Tails from USB drive "__internal" with network unplugged
32.790
And
I enable persistence
11.238
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.958
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.198
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.450
And
I can open the Additional Software configuration window from the notification
2.529
And
I shutdown Tails and wait for the computer to power off
18.021
And
I start Tails from USB drive "__internal" with network unplugged
33.249
And
I enable persistence
10.853
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
7.076
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056