And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.236
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.479
And
I accept adding "cowsay" to Additional Software
4.821
And
Additional Software is correctly configured for package "cowsay"
0.523
And
I shutdown Tails and wait for the computer to power off
2.797
And
I start Tails from USB drive "__internal" with network unplugged
34.825
And
I enable persistence
11.769
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
8.210
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.042
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.279
And
I can open the Additional Software configuration window from the notification
2.603
And
I shutdown Tails and wait for the computer to power off
18.029
And
I start Tails from USB drive "__internal" with network unplugged
34.159
And
I enable persistence
12.417
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.699
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.476
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053