And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.025
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.118
And
I accept adding "cowsay" to Additional Software
3.956
And
Additional Software is correctly configured for package "cowsay"
0.521
And
I shutdown Tails and wait for the computer to power off
2.709
And
I start Tails from USB drive "__internal" with network unplugged
31.918
And
I enable persistence
10.493
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
6.791
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.379
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.036
And
available upgrades have been checked
1.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.769
And
I can open the Additional Software configuration window from the notification
2.383
And
I shutdown Tails and wait for the computer to power off
12.829
And
I start Tails from USB drive "__internal" with network unplugged
31.266
And
I enable persistence
10.209
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.253
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071