And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:9.945
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.167
And
I accept adding "cowsay" to Additional Software
3.927
And
Additional Software is correctly configured for package "cowsay"
0.455
And
I shutdown Tails and wait for the computer to power off
2.539
And
I start Tails from USB drive "__internal" with network unplugged
32.118
And
I enable persistence
10.118
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.035
And
I log in to a new session
6.931
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.030
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.296
And
I can open the Additional Software configuration window from the notification
2.406
And
I shutdown Tails and wait for the computer to power off
12.530
And
I start Tails from USB drive "__internal" with network unplugged
32.214
And
I enable persistence
10.746
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.546
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049