And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.406
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.106
And
I accept adding "cowsay" to Additional Software
4.290
And
Additional Software is correctly configured for package "cowsay"
0.643
And
I shutdown Tails and wait for the computer to power off
2.664
And
I start Tails from USB drive "__internal" with network unplugged
34.708
And
I enable persistence
12.142
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
7.365
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.026
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.521
And
I can open the Additional Software configuration window from the notification
2.479
And
I shutdown Tails and wait for the computer to power off
17.023
And
I start Tails from USB drive "__internal" with network unplugged
35.154
And
I enable persistence
13.968
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.500
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.418
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071