And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.604
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.480
And
I accept adding "cowsay" to Additional Software
5.046
And
Additional Software is correctly configured for package "cowsay"
0.567
And
I shutdown Tails and wait for the computer to power off
4.195
And
I start Tails from USB drive "__internal" with network unplugged
34.830
And
I enable persistence
13.025
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
7.264
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.022
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.346
And
I can open the Additional Software configuration window from the notification
2.596
And
I shutdown Tails and wait for the computer to power off
12.844
And
I start Tails from USB drive "__internal" with network unplugged
35.886
And
I enable persistence
14.358
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.315
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078