And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.778
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.996
And
I accept adding "cowsay" to Additional Software
5.240
And
Additional Software is correctly configured for package "cowsay"
0.628
And
I shutdown Tails and wait for the computer to power off
2.641
And
I start Tails from USB drive "__internal" with network unplugged
34.044
And
I enable persistence
12.152
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.077
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.026
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.840
And
I can open the Additional Software configuration window from the notification
2.474
And
I shutdown Tails and wait for the computer to power off
16.782
And
I start Tails from USB drive "__internal" with network unplugged
34.182
And
I enable persistence
14.129
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.279
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.463
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046