And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.553
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.438
And
I accept adding "cowsay" to Additional Software
5.089
And
Additional Software is correctly configured for package "cowsay"
0.725
And
I shutdown Tails and wait for the computer to power off
4.455
And
I start Tails from USB drive "__internal" with network unplugged
34.778
And
I enable persistence
12.978
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
7.909
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.266
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.029
And
available upgrades have been checked
1.084
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.442
And
I can open the Additional Software configuration window from the notification
2.616
And
I shutdown Tails and wait for the computer to power off
18.538
And
I start Tails from USB drive "__internal" with network unplugged
34.799
And
I enable persistence
11.809
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
8.610
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075